IDTECK Star Finger007, Manual

Page: 35 / 103

p.28 Wiring
●
Connect GND (-) wire of DC 12V power to GND (Black wire)
3.2 Input Connections
Exit Button Connection (Exit)
●
Connect one wire from an Exit Button to exit (Orange wire).
●
Connect the other wire from the Exit Button to the GND (Black wire).
Door Contact Sensor Connection (Contact)
●
Connect one wire from a Door Contact Sensor to contact (Yellow wire with Red stripe).
●
Connect the other wire (NC) from the Door Contact Sensor to GND (Black wire).
Auxiliary Input Connection (Applied IN1, IN2)
●
Connect one wire from an Auxiliary Input device to one of the IN1 (Green wire), IN2 (Gr
een with White stripe).
●
Connect the other wire from the Auxiliary Input device to GND (Black wire).
2.2K Resistance Connection for Cut Off Check
You have to connect a 2.2K Resistor between the input wire (e.g. Orange wire) and the GN
D to apply the Cut Off Check feature. First, select whether or not to check the Cut Off status