IDT Tsi620, User Manual, Page: 27 / 55

27
Tsi620 Evaluation Board User Manual
60D7000_MA001_03
Intergrated Device Technology
www.idt.com
Table 8 summarizes the major components’ supply requirements and max potential current demand.
1.3.6.2 Power Distribution Implementation
• The LTM4601, LTC DC/DC switching micro module gen5V, +3.3V, 1.1V_DSP, and
1.1V_FPGA (see
Figure 9 )
• 4x LTM4601 work in synchronous mode and are controlled by a 4 phase PLL driver
• TCI6488 power management supports the core voltage scaling for power consumption
auto-control
• TCI6488 SerDes 1.1V supply comes from FPGA_CORE_1.1v
• Both LTM4601and TI switching modules support auto-tracking, which is used for silicon power
sequencing control
• The LTM4604, 4A, (15 mm x 9 mm x 2.3 mm) DC/DC switching regulator gen1.2V,
+1.5V, +1.8V, and +2.5v from either 5V rail or 3.3V rail.
• -12V is implemented on-board for PrPMC only with max I <= 350mA
Table 8: Major Components Power Supply Requirement (Power Budget)
Device 1.1V 1.2V 1.5V 1.8V 2.5V 3.3V 3.3VSB 5V 12V Notes
a
a. IG = Ignore, FGR = Finger connector.
Tsi620 3A 0.5A 0.5A <4.7W, sequencing
TCI6488 7A+1A 1A <9W, sequencing req.
EP3SL150 8A 0.5A 0.5A 0.5A 0.5A Assume <10W (TBV)
DDR2 x6 0.7A 350mA x2
VCS8221x2 0.5Ax2 <0.8w inner reg@1.2v
S25FL064 IG
PrPMC 4.5A 3A 0.5A Tall<25W, -12V@0.5A
AT24C512 IG
AMC SLOT 3A ½(60W)=30W
AFS600 80mA 0.1A 3.3V_MP@100mA
CDCL6010 0.5A
AMC FGR -6A 8V~14Vin, 60W
Ex Power -5A From DC barrel plug
LED 0.5A
Total 8A+8A 3A 1A 3A 0.5A 7A 1A 3A