idp SMART-30R User Manual Download Page 71

Page: 71 / 88

4.3.2. Laminator Firm-ware Upgrade.

This function is only for card printer firm-ware version 1.00.60 and laminator should be installed to the

printer. If you click “Browse” and select the new firmware, “Manual Update” and ”Update” are activated.
At that time, click “Update” button to upgrade automatically, then the printer is upgraded after rebooting.

(Caution: Please do not close upgrade dialog box until it is completed successfully and do not turn off

the printer.)

Pic.123 Ready for laminator firm-ware upgrade

In case there are some problems in the automatic upgrade, you click “Manual Update” and can see the

pop-up widow as below picture. It shows procedure of manual upgrade. You can upgrade manually
according to this procedure.

Pic.124 Firm-ware manual upgrade

Summary of Contents for SMART-30R

























































































Search results

Summary of Contents for SMART-30R

Reviews:

Related manuals for SMART-30R

Brands by name

Popular brands

idp SMART-30R, User Manual

Search results

Summary of Contents for SMART-30R

Reviews:

Related manuals for SMART-30R

Brands by name

Popular brands