69
#define LMSC_S_CARDOUTSENSOR
0x0000000040000000
// Caught by card out sensor
#define LMSC_S_OUTDOORSENSOR 0x0000000080000000
// Caught by stacker open sensor
Laminator’s Error Code
#define LMSC_E_HEATHDRLIFTUP
0x0000000100000000
// Error while lifting up Heat-header
#define LMSC_E_HEATHDRLIFTDOWN 0x0000000400000000
// Error while lifting down Heat-header
#define LMSC_E_CARDIN
0x0000001000000000
// Error while moving card in
#define LMSC_E_MOVE_LAMINATE
0x0000004000000000
// Error while moving to Laminate position.
#define LMSC_E_FRONTCARDOUT
0x0000010000000000
// Error while front card out (printer side)
#define LMSC_E_REARCARDOUT
0x0000020000000000
// Error while rear card out (stacker side)
#define LMSC_E_ROTATE
0x0000040000000000
// Error while rotating
#define LMSC_E_INIT
0x0000800000000000
// Error while initializing laminator
#define LMSC_E_EMPTYFILM
0x0001000000000000
// Film remain count is 0.
#define LMSC_E_NOFILM
0x8000000000000000
// No film is installed, or cannot
4.3. Firmware upgrade
When you run the CardPrinterFirmware, you can see the pop-up window as the Pic. 120.
Device:
Select the local printer that you want to upgrade.
Card Printer / Laminator:
Select the device you want upgrade.
Device Version:
Displays the current firmware version of selected printer.
Binary File:
Click “Browse” button and select new firmware file to update.
Manual Update:
It is used when you want to upgrade manually.
Update:
Upgrades automatically. In generally, we recommend upgrading automatically.
Close:
Exit.
Message :
It displays information of upgrading.
Pic.120 Upgrading printer firmware
