(C) IDM ENERGIESYSTEME GMBH
2. Description
Installation instructions Hygienik 2.0
6
2. Description
2.1. Hygienik 2.0
The iDM-Hygienik 2.0 is a complete water heater with
hygienic hot water supply using a counter
fl
ow plate
heat exchanger.
The tank containing heating water is heated as re-
quired via an external heat generator (e.g. via a heat
pump, an oil or gas boiler, wood boiler,...).
The hot water is heated in a continuous process via
a large-area counter
fl
ow heat exchanger made of
stainless steel. This prevents bacterial growth. Two
hose connections and an isolating valve are provided
for easy decalci
fi
cation of the plate heat exchanger.
The plate heat exchanger is supplied with heat from
the tank via a speed-controlled primary circuit pump.
The primary circuit pump is activated via a
fl
ow switch
in the cold water line.
The tank is suitable for charging with an iDM heat
pump. A screw-in electric heating immerser can also
be used to heat the tank. A further option is the use of
a solar plant with hot water supply via a solar station
which is available as an accessory.
The iDM-Hygienik 2.0 is available in two versions:
-
With layer separate plate (suitable in the upper sec-
tion for hot water heating and in the lower area as a
buffer storage tank). The layer separate plate main-
tains temperature strati
fi
cation, in particular when
using the Hygienik 2.0 with an iDM heat pump.
-
Without layer separate plate (only for hot water
heating)
Application range
With the Hygienik 2.0, hot water tapping quantities of
up to 70 l/min. can be achieved. Large-scale prem-
ises can be supplied by combining several tanks.
Scope of delivery
The Hygienik 2.0 comprises a storage tank with all
necessary connections and two sensor rails for
precise positioning of the required sensors. The tank
body is equipped with
fl
eece/Neopor
®
insulation and
enclosed in a plastic outer shell with a black cover.
2.2. Hot water station
The hot water station can either be mounted directly
on the Hygienik 2.0 or on a wall. This means it is also
possible to operate the hot water station with a tank
made by another manufacturer.
Scope of delivery:
- Hot water stations 25 l or 35 l with or without
mixing valve
- Hot water stations 50 l or 70 l
- Bracket for installation of the hot water station on
a wall
- Screws for mounting the hot water station on the
Hygienik
- iDM cover hood for the hot water station, made
from EPP rigid foam
- Installation instruction
Optional accessories
- Controller UVR 61-3 HEP
- Heat meter
- Circulation module for installation in the hot water
station 25l and 35l
