iDM HYGIENIK 2.0, Installation Instruction

Page: 35 / 60

(C) IDM ENERGIESYSTEME GMBH
Installation instructions Hygienik 2.0
35
Programming the UVR 61-3 HEP
Ch
a
p
te
r 06
Change Max limitation switch-on threshold for sensor T2 (tank sensor), factory set-
ting 85 °C,
as follows: Press , display begins to fl ash
Change setting with or
Save setting with , display stops
fl ashing
Press ►
Change Max limitation switch-off threshold for sensor T4 (not assigned), factory
setting 47 °C,
as follows: Press , display begins to fl ash
Change setting with or
Save setting with , display stops
fl ashing
Press ►
Change Max limitation switch-on threshold for sensor T4 (not assigned), factory
setting 42 °C,
as follows: Press , display begins to fl ash
Change setting with or
Save setting with , display stops
fl ashing
Press ►
Change Min limitation switch-on threshold for sensor T1 (collector sensor), factory
setting 30 °C,
as follows: Press , display begins to fl ash
Change setting with or
Save setting with , display stops
fl ashing
Press ►
Change Min limitation switch-off threshold for sensor T1 (collector sensor), factory
setting 25 °C,
as follows: Press , display begins to fl ash
Change setting with or
Save setting with , display stops
fl ashing
Press ►
Change Min limitation switch-on threshold for sensor T3 (not assigned), factory set-
ting 45 °C,
as follows: Press , display begins to fl ash
Change setting with or
Save setting with , display stops
fl ashing
Press ►
85
Par
K
max 1
Par
K
max 2
Par
K
max
2
30
Par
K
min 1
25
Par
K
min 1
Par
K
min 2
47
42
45