(C) IDM ENERGIESYSTEME GMBH
Installation instructions AERO ILM
7
General description
AERO ILM heat pumps function with the safety re-
frigerant R410A which, if in the event of a proper as-
sembly and installation circulates in a closed circuit,
represents practically no environmental impact.
1.17. Scope of delivery
- Heat pump aggregate with modulating scroll cap-
sule compressor (AERO ILM 4-13) or rolling piston
compressor (AERO ILM 2-7)
- Inverter with patented CIC-technology
- Copper-welded stainless steel plate heat exchanger
as condenser
- HGL-plate heat exchanger (only ILM HGL type)
- Finned tube Al/Cu evaporator package
- Speed-controlled radial fan
- Refrigerant collection and dehydration
- Liquid separator
- 2 pcs. electronic expansion valves
- Refrigerant level indicator
- Pressure sensors for high and low-pressure moni-
toring
- Cartridge pressure control switch for high-pressure
monitoring
- Installed switching valve for cooling/defrosting
- Suction air sensor
- High-e
ffi
ciency loading pump
- 3-way valve for priority mode (ILM type) orHGL-
valve for HGL-mode (ILM HGL type)
- Flow switch
- Electrical heating rod 6 kW for possible subsequent
heating
- Heat and sound-insulated cover panels
- colored 7” touch display
- 3 pcs.
fl
exible connection hoses
- Condensate drain tube
- nonreturn valve (loose)
- 2 pcs. sound reduction mats to place below the
heat pump
- network connector for myIDM integration
1.18. Accessories
see iDM price list
