(C) IDM ENERGIESYSTEME GMBH
1. General description
Installation instructions AERO ILM
6
General description
The lower the maximum
fl
ow temperature
is, the higher the coe
ffi
cient of perfor-
mance (COP) of the heat pump will be.
1.15. Description
AERO ILM is a compact air-water-heat pump with
modulating scroll capsule compressor with largely
dimensioned multi-row Al/Cu
fi
nned tube evaporator.
By a special speed-controlled radial fan large volume
fl
ows can be achieved at low speeds.
A copper-welded stainless steel plate heat exchanger
is used as condenser. The machine frame consists of
a strong metal pro
fi
le. The cover panels are insulated
perfectly. The housing is thus completely without a
thermal bridge and thus features optimum sound in-
sulation values.
The heat pump is complete from a hydraulic viewpoint
and features a high-e
ffi
ciency loading pump, the safe-
ty device, an expansion container, the electric heating
rod, the priority valve respectively the HGL-technolo-
gy, a
fl
ow switch and all necessary sensors.
The heating controller (Navigator 2.0) developed es-
pecially for this system o
ff
ers a variety of additional
applications, e.g. Smart Grid, Remote Control or op-
eration via a smart phone.
The heat pump is designed in compact construction,
the evaporator is mounted in the top part of the heat
pump casing. The heat pump is
fi
lled with refrigerant
and is tested in the plant to ensure its perfect function.
1.16. Intended use
For monovalent heating and cooling of detached and
semi-detached houses in appropriate climatic envi-
ronments. The building should be furnished with a
low-temperature heating (e.g. under
fl
oor heating, wall
heating, low-temperature radiator heating ...).
The heat pump must be used only for domestic, but
not for commercial operation, eg production of pro-
cess heat.
For the installation of the heat pump all
pertinent national and international lay-
ing, installation, accident prevention and
safety regulations in connection with the
installation of pipeline systems and elec-
tric components and equipment as well as
instructions in this assembly manual must
be observed.
1.11. Information on environmental protection
Heat pumps are electronic devices of
high-quality material which must not be
disposed of in the same way as house-
hold waste. They must be disposed of in
a professional and appropriate manner
pursuant to the regulations of the local
authorities. Disposal contrary to the
regulations may lead damage the envi-
ronment and health with the exception
of sanctions imposed on law breakers.
1.12. Piping and pipe-wall-ducts
All pipelines and wall ducts must be discharged in
compliance with standards, according heat-insula-
tion, sound-decoupling and water-carrying pipes in a
frost-proof manner.
1.13. Installation of additional components
The installation of additional components which have
not been veri
fi
ed with the equipment may impair the
function. No warranty or liability shall be assumed for
any damage resulting therefrom.
1.14. Standards and guidelines
These comprise among others:
- the generally valid accident prevention and safety
regulations
- the provisions regarding environmental protection
- the regulations of the professional associations
- the pertinent laws, standards, regulations and pro-
visions, e.g. DIN, EN, DVGW, VDI and VDE.
- Provisions of the local public utilities.
