MSD-62 Series User’s Guide
68
9.4.4 Aspect ratio control
Menu Top
→
OUTPUT TIMING
→
ASPECT PROCESS
Setting for Each input channel, each input signal
Setting value L-BOX/S-PANEL
: Letter box/side panel [Default]
S-CUT/TB-CUT : Side cut/top bottom cut
Below is a visual description of restoring aspect ratio:
Input signal
16:9 input video is output to
a 4:3 sink device.
L-BOX/S-PANEL
Letter box
S-CUT/TB-CUT
Side panel
Output signal
4:3 input video is output to a
16:9 sink device.
Side cut
Top/bottom cut
[Fig. 9.6] Restoring aspect ratio
9.4.5 Overscan
Menu Top
→
OUTPUT TIMING
→
INPUT OVER SCAN
Setting for Each input channel, each input signal
Setting value 100% to 115%
[Default]NTSC / PAL / SDTV: 105%, HDTV / PC: 100%
You can create an enlarged display of input video.
9.4.6 Display position
Menu Top
→
OUTPUT TIMING
→
INPUT POSITION (input side) / OUTPUT POSITION (output side)
Setting for Input side : Each input channel, each input signal
Output side : Each output channel
Setting value
Input side:
Horizontal position (-Horizontal input size to +Horizontal output resolution [Default] 0)
Vertical position (-Vertical input size to +Vertical output resolution [Default] 0)
Output side:
Horizontal position (-Horizontal output size to +Horizontal output resolution [Default] 0)
Vertical position (-Vertical output size to +Vertical output resolution [Default] 0)
You can set the position where input video is displayed.
Note:
If the resolutions of each output are not the same, the resolution of OUT1 will be the standard.
