IDK MSD-6203, User Manual

Page: 18 / 180

MSD-62 Series User’s Guide
18
[Table 5.3] Rear panel features (Cont’d)
# Feature Description
⑦
HDMI output connectors Output connectors for HDMI and DVI signal, interfaces with sink devices
such as LC monitors and projectors.
【
See: 9.9.8 Output connector
】
⑧
HDBaseT output
connectors
Output connector for HDBaseT signal
Connects to a receiver over a twisted pair cable.
【
See: 7.2.3 Twisted pair cable for extension
】
【
See: 9.9.8 Output connector
】
【
See: 9.9.17 HDBaseT output long reach mode
】
⑨
Audio output connector Analog audio output connectors interface to amplifiers, speakers, and
mixers.
Connector type is 5-pin terminal block.
【
See: 7.2.4 Connecting audio cable
】
⑩
RS-232C connector For external control by communication commands
Connector type is 3-pin terminal block.
【
See: 7.2.5 Connecting RS-232C
】
⑪
LAN connector For external control by communication commands or web browsers
⑫
Contact closures For external device control by dry contact closure
Connector type is 6-pin terminal block.
【
See: 7.2.6 Contact closure
】
⑬
Dante connectors
(Optional)
Output connector for Dante audio
Input digital and analog audio signals are converted into Dante format.
【
See: 8.8 Dante output (Optional)
】
⑭
Maintenance port Factory use only
⑮
Power supply connector For use with provided power cable.
⑯
Frame ground Use for bonding chassis to local ground. An M3 screw is used.