MSD-62 Series User’s Guide
155
■
Error code
From the left, statuses of video output, digital audio output, and analog audio output are displayed.
(Example: AAA)
[Table 9.56] Error code
Code
Video output
Audio output
If any number or character is not displayed, video or audio is output correctly.
1
-
is set to “ON”.
2
Displayed only for digital input. DDC power supply is not input.
(If no source device is connected, this error code is displayed).
3
No video signal is input.
No video signal is input.
*1
4
Displayed only for digital input. Video or audio output of source device is in a Mute status.
5
Displayed only for digital input. Signal with HDCP are input, but the sink device does not support
HDCP. (This error code may also be displayed while authenticating HDCP).
6
Displayed only for digital input. The source device does not output required information (packets)
for outputting video or audio.
7
Signal that are not supported by the MSD are
input. (Sampling clock is out of the range)
Signal that are not supported by the MSD are
input. (Sampling clock is out of the range).
8
-
-
9
-
” is set to “DVI MODE” or
a sink device that does not support audio is
connected.
*2
A
Input channel is set to “OFF”.
*1
Input status of analog audio signal cannot be detected. Even if this status is not displayed, audio may
sometimes not be output when analog input is selected.
*2
This status is only for HDMI output connectors.