IDK MSD-5401 User Manual Download Page 227

Page: 227 / 271

227

8.16.4 Aspect ratio [ASPECT]

･

AUTO [Default]

･

FULL

･

THROUGH

Output screen (1920x1080)

[

“

AUTO

”

]

[

“

THROUGH

”

]

Aspect ratio is kept, and the image
is displayed on the whole screen
vertically.

If the image is output as it is, it
becomes smaller against the
output screen.

[FULL]

Output screen (1920x1080)

Aspect ratio is not kept, and the image
is displayed on the whole screen.

Bitmap (1024x768)

[Figure 8.68] Setting aspect ratio

Note:

Bitmaps can be enlarged but cannot be reduced

. If you select “AUTO”, the aspect ratio is kept. However, if

either of horizontal or vertical is enlarged and the other is reduced, the aspect ratio cannot be kept. In such a

case, the image is displayed using

“THROUGH” automatically to keep the aspect ratio.

For each output/bitmap

Summary of Contents for MSD-5401
















































































































































































































































































Search results

Summary of Contents for MSD-5401

Reviews:

Related manuals for MSD-5401

Brands by name

Popular brands

IDK MSD-5401, User Manual

Search results

Summary of Contents for MSD-5401

Reviews:

Related manuals for MSD-5401

Brands by name

Popular brands