IDK MSD-5401, User Manual, Page: 197 / 271

197
■
MSD-5402, MSD-5402SL
[Table 8.24] MSD-5402 and MSD-5402SL: Parallel input connectors by default
Pin
No.
Description Function
Pin
No.
Description Function
1 No Connection 26 No Connection
2 OUT1-IN1
*2
Selecting input
channel of OUT1
*1
27 COMMAND A
Sending control
commands
3 OUT1-IN2
*2
28 COMMAND B
4 OUT1-IN3
*2
29 COMMAND C
5 OUT1-IN4
*2
30 COMMAND D
6 OUT1-IN5
*2
31 COMMAND E
7 OUT1-IN6
*2
32 COMMAND F
8 OUT1-IN7
*2
33 COMMAND G
9 OUT1-IN8
*2
34 COMMAND H
10 OUT1-IN9
*2
35 COMMAND I
11 OUT1-OFF 36
AUDIO-OUT1 UP/
Phase A
Audio output level of
OUT 1
*4
12 OUT2-IN1
*2
Selecting input
channel of OUT2
*1
37
AUDIO
–OUT1
DOWN/B
13 OUT2-IN2
*2
38 AUDIO-OUT1 MUTE
14 OUT2-IN3
*2
39
AUDIO-OUT2 UP/
Phase A
Audio output level of
OUT 2
*4
15 OUT2-IN4
*2
40
AUDIO
–OUT2
DOWN/ Phase B
16 OUT2-IN5
*2
41 AUDIO-OUT2 MUTE
17 OUT2-IN6
*2
42
DISPLAY1
POWER ON/OFF
Controlling display
device power of OUT 1
*5
18 OUT2-IN7
*2
43
DISPLAY2
POWER ON/OFF
Controlling display
device power of OUT 2
*5
19 OUT2-IN8
*2
44 PARALLEL LOCK Locking parallel input
*6
20 OUT2-IN9
*2
45 NOT USE
Not assigned
21 OUT2-OFF 46 NOT USE
22
SWITCHING
–
V&A
Selecting channel
switching mode
*3
47 NOT USE
23
SWITCHING
–
VIDEO
48 NOT USE
24
SWITCHING
–
AUDIO
49 NOT USE
25 GND 50 GND
*1
Channels (video/audio) to be switched depend on the channel switching mode selected.
*2
If you want to switch the selected cha
nnel and turn “OFF” alternately, set “
8.14.6 Toggle
“ to “ON”.
If you want to perform automatic measurement of input timing setting, set
“
8.14.9 Analog input
measurement
“ to “ENABLE” and press one of IN6 to IN9 keys for 2 seconds or longer. For details of
automatic measurement, see “
8.6.6 Analog input automatic measurement
”.
*3
Channel switching modes of the front panel and parallel input are independent from each other. If you want