IDK MSD-5401 User Manual Download Page 138

Page: 138 / 271

MSD-54 SERIES User

’s Guide

138

8.9.3 Input resolution for AV devices [AV RESOLUTION]

This menu is valid only if you select

“INTERNAL EDID” for “

8.9.1 EDID setting

“ and an AV device such as

Blu-

ray disc player is connected. Normally, select “AUTO” and set the resolution using the setting of ”

8.9.2 PC

resolutions

”.

･

UNUSED

･

720p

･

1080p

･

480p

･

1080i

･

AUTO [Default]

“UNUSED” disables the EDID for AV devices. If you select “AUTO” and the resolution output from the PC is
different from the

resolution set in Properties, the problem may be solved by selecting “UNUSED”. If you

select “UNUSED”, the settings of ”

8.9.4 Deep Color

”, “

8.9.5 Audio format

”, and “

8.9.6 Speaker

configuration

“will be disabled and audio is not output because the source device outputs signal through DVI

mode.

If there is a potential to connect both PCs and AV devices with different resolutions (for example, PC with

WXGA (1366x768), Blu-ray disc player with 1080p), set the PC resolution in

”

8.9.2 PC resolutions

” and

select the AV resolution from 480p, 720p, 1080i, and 1080p in this menu. However, some PCs and AV

devices may choose the higher resolution of the resolutions set in

”

8.9.2 PC resolutions

” or set in this menu.

If you select “AUTO”, resolutions for AV devices are set automatically according to the settings of ”

8.9.2 PC

resolutions

”.

[Table 8.7] Input resolutions with

“AUTO”

PC resolution

800

600

1024

768

1280

720

1280

768

1280

800

1280

960

1280

1024

1360

768

1366

768

1400

1050

1440

900

1600

900

1600

1200

1680

1050

1920

1080i

1920

1080p

1920

1200

2048

1152

AV resolution

480p

720p

1080i

1080p

1. To set the HDTV resolution using menu:

MSD-5404

Top

↓

SET key

[FUNCTION SELECT]
EDID

▲▼

keys: Select “EDID”.

↓

SET key

[EDID]
AV RESOLUTION

▲▼

keys: Select ”AV RESOLUTION”.

↓

SET key

[IN1 AV FORMAT]

UTO

▲▼

keys: Select the desired resolution for the AV device.

◄►keys: Select the desired input (IN1 to IN5).

↓

SET key: Applies settings.

[AV RESOLUTION]
NOW UPDATE...

The message is displayed for one second and then previous screen is

displayed automatically.

↓

[EDID]
AV RESOLUTION

Note:

If you do not press the “SET” key, the AV resolution is not changed. Make sure to press the “SET” key.

For each input

Summary of Contents for MSD-5401
















































































































































































































































































Search results

Summary of Contents for MSD-5401

Reviews:

Related manuals for MSD-5401

Brands by name

Popular brands

IDK MSD-5401, User Manual

Search results

Summary of Contents for MSD-5401

Reviews:

Related manuals for MSD-5401

Brands by name

Popular brands