Part 2 - Configuration
45
Image
•
2D Noise Filter, 3D Noise Filter, Sharpness:
You can
set up 2D, 3D Noise Filter and Sharpness functions
for each channel. Each function can be applied
between 1 (Weak) ~ 5 (Strong) according to Daytime/
Nighttime.
•
Daytime Setup
: Specify when daytime starts and
ends. Adjust the time frame in 15-minute increments.
Times outside the specified range will be assumed as
nighttime by the system.
PTZ
•
Product:
You can select the PTZ camera you wish to
configure.
•
ID:
You can assign IDs to each camera by highlighting
the box under the ID heading. Change the number
by highlighting it and using the Up and Down arrow
buttons to increase and decrease the number. The
PTZ ID number can be set from 0 to 256.
<RS232/RS485>
<UTC>
•
Mode:
Select
None, UTC, RS232,
or
RS485
. UTC is
only used for HD and Full HD cameras.
•
You will need to connect the camera to the RS232 or
RS485 connector on the back of the DVR following the
camera manufacturer’s instructions.
