Part 1 - Getting Started
11
Full Sequence
Displays all channels in sequence while in Live mode
(single and PIP split screen settings). In order to use the
Full Sequence
feature,
Full Sequence
(Display Setup -
Main Monitor > Sequence) must first be enabled.
e.g.) Full Sequence in 2x2 split screen mode
1
5
9
13
1
3
7
11
15
3
2
6
10
14
2
4
8
12
16
4
Cameo Sequence
In
Cameo Sequence
mode, only the bottom right
screen in a split screen setup changes sequence. In order
to use the
Cameo Sequence
feature,
Cameo Sequence
(Display Setup - Main Monitor > Sequence) must first be
enabled.
e.g.) Cameo Sequence in 2x2 split screen mode
1
1
1
1
1
1
3
3
3
3
3
3
2
2
2
2
2
2
4
5
6
15
16
4
•
While in the Sequence mode, the sequence icon
displays in bottom-left corner if Sequence is
selected in the Display setup screen.
•
Pages are skipped under the following
circumstances:
– If all cameras included in the page are
deactivated.
– If there are no video signals.
– If the page contains "covert" cameras.
– If the user does not have permission to view
feeds from the cameras.
•
Camera Menu
–
PTZ:
Allows you to control the selected camera as
long as it has Pan, Tilt and Zoom capabilities. It is
the same as pressing the PTZ button.
–
Zoom:
Zooms the current image of the selected
camera on the screen. It is the same as pressing the
ZOOM button. Selecting Zoom again in the Camera
Menu again exits the Zoom mode.
–
Audio:
Enable/disable audio.
–
Color Control:
Allows you to control brightness,
contrast, hue and saturation for each camera for
the selected camera if a user who has Color Control
authority logs into the system.
–
Menu Control:
Adjusts the camera’s self-settings.
Menu Control is supported only for the cameras that
use DirectCx or C Protocol (H) and support UTC (Up The
Coax) function.
–
Edit Group:
Enter to the Edit Group mode in the
split screen layout.
•
Search
–
All Channels:
Exits the live monitoring mode and
enters the search mode.
–
Triplex:
Enters the Triplex mode. Selecting the
camera number plays back video of the selected
camera.
•
Setup
Used to access the Setup menu.
•
Status
Allows you to check the status of the DVR’s system,
event and storage.
