Part 2 - Configuration
81
Additional Event_Alarm-In
●
No.
: Enable / disable alarm-ins.
This option includes both local and network camera
alarm-ins. 1 through 16 are network camera alarm-ins,
whereas 17 through 20 are local alarm-ins.
●
Source
: Specify the device to use for Alarm-In event.
–
Channel
: Set the channel of the source you set.
–
Sub Channel
: Set the sub channel of the source
you set.
●
Title
: Use the virtual keyboard to enter titles.
●
Type
: Change the alarm-in type.
●
Alarm-In - Condition:
When a specific event occurs,
you can set the condition that determines whether
to operate motion according to the status of other
events
.
–
Reference Only
: Set the event to be the subject of
a reference.
–
Event
:
Set the reference event.
–
Channel
:
Set the reference channel.
●
Actions
: Specify which actions to take when Alarm-In
is detected.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out
: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
•
In order to use the Callback feature, the NVR must
be registered on the remote program.
•
Select
Panic Record
to specify which alarm-in
channels to use. Panic Record commences when
the corresponding alarm-in occurs and terminates
when the alarm-in is deactivated.
