Idis DC-B1001, Operation Manual

Page: 44 / 58

Part 3 - Remote Setup
44
DC-B1103 / DC-B1203
•
System Alive
: Select to check the system status
and then set up a schedule.
- Send Email : Select to send out an email when
the system comes on line.
- Remote Callback : Select this option to send a
message to a remote system when the system
comes on line and then select which system to
send the message to.
• Alarm In Bad : Select to check the alarm in status
and then set up a schedule. DC-B1103 / DC-B1203
only
- Send Email : Select to send out an email if no
change is detected in the alarm in status.
- Remote Callback : Select this option to send
a message to a remote system if no change is
detected in the alarm in status and then select
which system to send the message to.
• Disk In/Out : Select to check if the SD card has
been inserted/removed. DC-B1103 / DC-B1203
only
- Send Email : Select to send out an email when
the SD card is inserted/removed.
- Remote Callback : Select this option to send a
message to a remote system when the SD card is
inserted/removed and then select which system
to send the message to.
• Email and Remote Callback settings under
Event Action must be configured correctly in
order to send out emails and messages.
• Remote Callback is not supported on IDIS Web.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.