Operator Manual Aspect 100UC Plus
L100-3065 REV C
INTRODUCTION
Overview
This manual is not intended as a substitute for certified training for the use of this
equipment. The operation of this equipment should be limited to qualified medical
personnel who have been trained in the use of medical equipment.
The text of this manual was originally written, approved and published by the manufacturer
in English.
This equipment complies with applicable FDA performance standards contained in 21CFR
at date of manufacture.
Owner Responsibilities
The owner of this equipment is responsible to ensure system compatibility, the
qualifications of operators and maintenance personnel. Operators must be properly
trained and have obtained credentials from the appropriate authorities.
This equipment must be installed in an area provided with the proper electrical power.
The owner of this equipment is responsible for verifying continued compliance with all
applicable regulations and standards. Consult local, state, federal and/or international
agencies regarding specific requirements and regulations applicable to the use of this
equipment.
Image Diagnostics, Inc. certifies only this equipment. Operating practices and safety for
this equipment are the sole responsibility of the owner and operators. Image Diagnostics,
Inc. assumes no liability or responsibility for personal injury or damage resulting from
misuse of this equipment.
Never make modifications or adjustments to this equipment unless directed by a qualified
Image Diagnostics representative. This equipment, when properly manufactured, meets
US federal regulations and international standards. Unauthorized modifications to this
equipment may impact adherence to these standards and make this equipment unsafe to
operate.
