Operator Manual Aspect 100UC Plus
L100-3065 REV C
• CLEANING THE RADIATION SHIELD
After each procedure, the radiation shield should be carefully cleaned
CLEANING STEPS
1. Remove the shield and lay it flat before using the recommended cleaner in an
adequately ventilated area.
2. Apply to one side at a time and allow to stand a few minutes.
3. Scrub with a soft bristle scrub brush. Do not let the solution dry before
rinsing.
4. Rinse with water and a damp cloth.
5. Scrub and rinse again, if necessary.
6. Attach shield back on table.
APPROVED AND TESTED DISINFECTANT CLEANER:
•
Scrubbles
(Infab Corporation)
www.infab.org/catalog/apron_options_and_accessories.htm
CAUTION
Observe cleaning product cautions found on
product labels.
