Operator Manual Aspect 100UC Plus
L100-3065 REV C
•
FOOT CONTROL
To move tabletop, depress disc or button and hold depressed until
desired position is reached.
The tabletop will pause at the horizontally level position during Trendelenburg motion.
Release and
activate control again to continue past level. As the position of the patient’s
head may be at either end of the table, the action may be opposite to what is indicated by
the label on the control.
• Use foot control attached to table or place on floor.
• Foot control tray may be removed from table if desired.
• Cover keeps control clean.
Note: The center disc (and the shaft attached to it) can be
pulled out during cleaning, if desired, and then simply pushed
back into place.
(Continued on next page)
Removable foot control tray
CAUTION
Always check that the patient is secure before activating
any table motion