Operator Manual
Aspect 100-4T G3 and ISR
G3
L100-2843 28-MAR-2018
12
Continually pressing down on the Rocker Switch to the right
of this symbol will
tilt up
the imaging end of the Table Top
in a
Trendelenburg direction
. When the Table Top reaches
a level position, motion will stop for 1 second. When the
Rocker Switch is pressed down if the Table Top is already in
a level position, it will take 1 second for motion to begin.
Continually pressing down on the Rocker Switch to the right
of this symbol will
tilt down
the imaging end of the Table
Top in a
Trendelenburg direction
. When the Table Top
reaches a level position, motion will stop for 1 second. When
the Rocker Switch is pressed down if the Table Top is
already in a level position, it will take 1 second for motion to
begin.
Continually pressing down on the Rocker Switch to the right
of this symbol will
roll
the Table Top in a
clockwise
direction
if looking down the length of the Table from the
pedestal end. When the Table Top reaches a level position,
motion will stop. The Rocker Switch will need to be released
and pressed down again for the motion to begin again.
Continually pressing down on the Rocker Switch to the right
of this symbol will
roll
the Table Top in a
counter-clockwise
direction
if looking down the length of the Table from the
pedestal end. When the Table Top reaches a level position,
motion will stop. The Rocker Switch will need to be released
and pressed down again for the motion to begin again.
Pressing in the Switch Lockout Pushbutton on the end of the
Motion Control Unit next to this symbol until it is fully
engaged will disable all the switches on the Motion Control
Unit. It DOES NOT lock out the lateral and longitudinal
motion controlled by the mushroom shaped Panhandle Float
Brake.
