Installation and Maintenance Guide for IDI Suspension System mounted to Canon DST-1000A Rails
L240-1429 REV A Image Diagnostics, Inc.
Page
9
Figure 2
2.
Place the two Triangulation Bars onto the top surface of the rail adapter sub-assemblies and
line up the slots in the bars with the closest inner Rail Clip hole locations as shown in Figure
2.
3.
Loosely attach two rail clips to each of the two rail adapters in the inner rail clip locations as
shown in Figure 2 using 3/8-16 x 2” painted bolts, flat washers, lock washers and nylon
locknuts. Make sure to orientate the Rail Clips as shown in Figure 2 so that they will be able
to clamp onto the IDI supplied Cross Rails.
Figure 3
4.
Place and orientate 6ft.-8in. IDI Cross Rails against the inner rail clips (from assembly step 3)
and mount remaining four outer rail clips as shown in Figure 3. Slide the Cross Rails until
they are aligned and centered under both Rail Adapter sub-assemblies and adjust the