Installation and Maintenance Guide for IDI Suspension System mounted to Canon DST-1000A Rails
L240-1429 REV A Image Diagnostics, Inc.
Page
19
INSTALL MOBILE CABLE HANDLING ASSEMBLY
1.
Slide two Nut Plates into the outer track of the Cross Rails. Apply Loctite #242 to the threads
of two standoffs and then assemble into nut plates hand tight only. See Figure 12.
Figure 10
2.
Align Safety Brackets with the inner threaded holes of the Nut Plates and fasten with a lock
washer and a 3/8in. long socket head cap screw.
3.
Slide Cable Trolley Assembly onto Cable Hanger shaft. See Figure 13.
4.
Assemble Cable Hanger shaft through holes in Safety Brackets and into the side holes of each
shaft support.
5.
Install mounting screw through the shaft supports, through the hole in the end of the Cable
Hanger shafts and into the standoffs. Lightly tighten mounting screws.
Figure 11