Installation and Maintenance Guide for IDI Suspension System mounted to Canon DST-1000A Rails
L240-1429 REV A Image Diagnostics, Inc.
Page
23
G. MAINTENANCE
"Authorized Technician"
All maintenance procedures should be done by an experienced technician with demonstrated
knowledge and skills (electrical and mechanical) relative to this type of equipment.
This individual must have access to this manual and the proper tools.
Daily Maintenance Checks:
1.
Pre-Operational and Post-Operational Checks
Perform daily checks of the monitor suspension BEFORE and AFTER operating the
equipment.
CAUTION! If any abnormality is found in the monitor
suspension, stop using it. Post a sign reading "DO
NOT USE" so that the system is not used until it is
repaired.
2.
Visual check
Before checking the operation of the equipment, confirm the following:
•
The monitor mount part of the suspension system is not tilted. See Figure 18.
•
There should be no gap at the point where the monitor mount attaches and pivots (labeled
as "A" in Figure 18).
•
Screws or parts are not loose or missing.
•
The pad mounted to the bottom of the monitor mount assembly is not damaged or
missing. See Figure 19.
Figure 16