2 Operational Check
Screen and Menu
4 Appendix
1 Overview
3-5
Menu item descriptions
z
Control commands
This screen is for transmitting control commands to the WB1F.
Actions can be executed such as barcode reading and turning the indicator LEDs on and off.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(10)
No.
Name
Description
(1) Communication monitor
Displays communication requests and responses.
Blue text: request, Red text: response
(2) ASCII
Sets the communication monitor to the ASCII display mode.
(3) HEX
Sets the communication monitor to the hexadecimal display mode.
(4) Clear
Clears the communication monitor.
(5) Start reading
Starts reading barcodes.
(6) Stop reading
Stops reading barcodes.
(7) OK out ON
Turns on the OK output. (RS-232 type only)
(8) OK out OFF
Turns off the OK output. (RS-232 type only)
(9) NG out ON
Turns on the NG output. (RS-232 type only)
(10) NG out OFF
Turns off the NG output. (RS-232 type only)
(11) PWM ON Success
Turns on PWM output for when reading is successful. (RS-232 type only)
(12) PWM OFF Success
Turns off PWM output for when reading is successful. (RS-232 type only)
(13) PWM ON Fail
Turns on PWM output for when reading fails. (RS-232 type only)
(14) PWM OFF Fail
Turns off PWM output for when reading fails. (RS-232 type only)
(15) Red LED ON
Turns on the indicator LED (red). The illumination time follows the setting value.
(16) Red LED OFF
Turns off the indicator LED (red).
(17) Orange LED ON
Turns on the indicator LED (orange). The illumination time follows the setting value.
