Download catalogs and CAD from http://asia.idec.com/downloads
E-084
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Saf
ety
P
ro
du
cts
Interlock
Switches
Non-contact
Interlock Switches
Safety Laser
Scanners
Safety Light
Curtains
Safety Modules
HS6B
HS6E
HS5D
HS5L
HS1L
Actuators for
HS1/HS5/HS6
Actuators/
Padlock Hasp
HS5 Series Slide Handle Actuator
Rear Unlocking Button Operation
40
Locked
HS5E-
L
Interlock Switch
(sold separately)
Unlocked
Press the rear unlocking button before
operating the rear lever.
Stroke: 5.5mm
Recommended Tightening Torque
Item
Tightening Torque
HS5D (Two M4 screws)
HS5E-
L/HS5E-K
L/HS5L-
L
(Four M4 screws)
1.8 to 2.2 N·m
Switch base unit (Two M6 screws)
4.5 to 5.5 N·m
Handle unit (Two M6 screws)
4.5 to 5.5 N·m
Actuator (Two M5
one-side screws)
2.7 to 3.3 N·m
The above tightening torque of the mounting screw is the value confirmed with
hex socket head bolts. When other screws are used and tightened to a smaller
torque, make sure that the screws do not become loose after mounting.
Safety Distance and Minimum Gaps
Before installing the HS5 series slide handle actuator, make sure to
take safety distance and safety clearance into consideration in order to
secure the distance between the mounting part (frame) and the hazard.
ISO 13852: Safety of machinery – Safety distances to prevent danzer
zones being reached by the upper limbs
ISO 13853: Safety of machinery – Safety distances to prevent danger
zones being reached by the lower limbs
ISO 13854: Safety of machinery – Minimum gaps to avoid crushing of
parts of the human body
Operating Instructions
