Hardware Installation » Manual Wall Mounting of Whiteboard
- 7 -
Model
A
B
IdeaMax R5-600
46 ½”
28 ¾”
IdeaMax R5-800
65
7
/
8
”
41 ¾”
IdeaMax R5-1000
85
5
/
16
”
41 ¾”
Mounting to Conventional Framing
Mounting to Masonry Wall
3)
Drill four 1/2” holes in the wall where
the toggle bolts will be placed for the
top mounting brackets.
4)
Fasten the brackets to the wall using
toggle bolts.
3) Drill four 3/8” holes in the wall where the
bolt and anchors will be placed for the top
mounting brackets.
4) Attach the top mounting brackets to the wall
using the included anchors and bolts. Tap the
anchors into the holes first, using your 9/16”
socket and ratchet to tighten the nuts until the
anchors set. Remove the nuts, place the
mounting brackets onto the bolts, then tighten
the nuts onto the bolts to secure the brackets.
5)
Use the chart above to measure downward from the center of the top mounting studs to
the center of where the holes for the bottom mounting studs will be drilled.