Hardware Installation » Projector Mounting & Alignment
- 11 -
Projector Mounting & Alignment
For
new mounts and projectors
, refer to the directions provided with your hardware for
mounting and setup instructions. Your projector mount should generally be aligned to hold
the projector lens horizontally centered to the board and so the image fits squarely to the
L-shaped brackets in the top-left and bottom-right corners of the whiteboard.
An online distance calculator (
http://www.
newline-interactive
.com/resources/projection-distance/
)
can assist you in determining the proper placement for your hardware. Calculate using the
diagonal
Projection Area
of your interactive whiteboard (54”, 75”, or 91” for the R5-600,
R5-800, and R5-1000 respectively).
If you have an
existing ceiling-mounted projector
, the same calculator can help determine
the appropriate distance for moving your existing ceiling mount . Although determining the
correct placement for your specific configuration may require some trial and error, further
changes to placement and calibration will not be necessary as long as the hardware remains
stationary.
