background image

 

II

 

Users

 

II

Natural Gas only
PI No.  

1312 BR 4912

Destination Countries:  

GB, IE

SAFETY

Current Gas Safety (Installation & Use) Regulations or Rules in
Force 

impose certain statutory obligations on gas users.  This

appliance must be installed by a CORGI registered installer, or
in IE a competent person, in accordance with the above
regulations.

1.

It is ESSENTIAL that the instructions in this booklet are
strictly followed, for safe, economical operation of the boiler.

1

CONTROLS OPERATION AND DISPLAY

2.

Do not obstruct ventilation ducts, grilles or openings in the
boiler room, or the passage of combustion and ventilation
out to the boiler.

3.

Do not store objects around or on the boiler, and keep
access clear at all times.

4.

Flammable materials must not be placed in close proximity
to the boiler.  Materials giving off vapours must not be stored
in the same room as the boiler.

5.

A dust free environment should be maintained in the room
containing the boiler.

6.

Do not turn off the boiler if it is to be left unattended in frosty
weather.

7.

The boiler must not be operated without the casing correctly
fitted.

8.

If it is known or suspected that a fault exists on the boiler
then is MUST NOT BE USED until the fault has been
corrected by a CORGI registered installer, or in IE a
competent person.

WARNING

This appliance MUST be efficiently earthed.

MAINTENANCE

The appliance should be serviced at least once a year by a
CORGI registered installer, or in IE a competent person.

CLEANING OUTER CASING

For normal cleaning simply dust with a dry cloth.  To remove
stubborn marks and stains use a damp cloth and mild
detergent.

DO NOT use abrasive cleaning materials.

1

2

4

3

5

7

6

S

T

O

R

E

M

O

D

E

R

E

S

E

T

S

T

E

P

Reset

D

i

sp

l

ay

Mode

Step

Store

+ -

On

/

Off

 

sw

i

tch

Reset

 

buttons

 

for

 

the

d

i

fferent

 

modu

l

es

Operat

i

on

 

and

 i

nd

i

cat

i

ons

 

on

 

the

 

d

i

sp

l

ay

 

(examp

l

e

 

w

i

th

 

7

 

modu

l

es)

Pressure

gauge

i

ma

 

578

4

All CORGI registered installers carry a CORGI ID card, and have a registration number. Both should be recorded in
your 

Benchmark 

Log Book.  You can check your installer by calling CORGI direct on 01563 72300

2

Summary of Contents for Imax Plus II F90









Reviews: