6
INSTALL
3.0 SYSTEM SETUP
It is highly recommended to keep close track of all device
barcodes. Instructions for ways to track are list here:
- Remove the 2 tear-away stickers that contain the
serial number (see image below).
- Apply these to a drawing of the space containing the
fixture or a tracking sheet to identify the serial number
and its location in the room (tracking sheet available
in Appendix, p. 47).
- If these tear away labels are missing, please write
down the serial number of the Luminaire Controller in
a safe place.
- These serial numbers are required in order to have a
fully functioning Audacy Wireless Controls system.
There are a number of ways to install an Audacy
®
Wireless
Controls system, and covered in this User Manual is the
*RECOMMENDED* approach. The following points are
important to remember during the installation process:
1. All Audacy devices have an associated barcode.
These barcodes are located on the back of all
devices, and are used to recognize a device on
AudacyControls.com. It is important to keep
track of where these devices are installed so that
AudacyControls.com is an accurate reflection of the
actual installation of the system.
2. Before electronically tracking devices, YOU MUST
INSTALL THE PROXY (FOR THE GATEWAY), SETUP
THE GATEWAY AND CREATE ROOMS (sections 3.3,
3.4 and 5.0 of this manual). The scanning feature on
the Audacy iOS app automatically adds devices into
rooms that exist. Devices cannot be added prior to
room creation.
3. The bar codes can also be entered into the system via
the scanning feature on the Audacy iOS app.
3.0 SYSTEM SETUP
3.2 PHYSICAL INSTALLATION
3.2.1 GATEWAY INSTALLATION
1. The Audacy Gateway has two mounting flanges that
can be used to mount it to a wall or other surface
using screws. (Before installation, note and record the
Mac Address and Serial Number on the underside of
the gateway for future reference).
2. For optimal performance, the antennas should be
placed in a vertical orientation.
3.1 MUST READ: SYSTEM INSTALLATION GUIDELINES
3.1.1 SERIAL NUMBER DEVICE TRACKING REQUIREMENT
Summary of Contents for Audacy Wireless Controls
