IDEAL INDUSTRIES Audacy Wireless Controls, User Manual, Page: 19 / 48

19
CONFIGURE 7.0 SYSTEM CONFIGURATION
SCHEDULE – Sets the occupied
state of the room according to a
recurring weekly schedule.
TURN LIGHTS
– ON, Lights turn on,
OFF, Lights turn off.
SET DIM
- Set the dim level of
lights. 10% = minimum light, 100% =
maximum light.
DIM MAXIMUM – Sets the maximum
true dim level of the lights.
SCENES – Customizable settings to
enable one-touch lighting changes.
VACANCY TIMEOUT – Sets the
amount of time after which lights turn
off when room is vacant.
OCCUPANCY STATUS
– Shows
when a room is occupied or not.
OCCUPANCY DIM – Set the default
occupied dim level of the lights. 10%
= minimum light, 100% = maximum
light. Lights will turn on with motion to
specified dim level.
VACANCY DIM – Set the default
vacancy dim level of the lights. 0%
= minimum light, 100% = maximum
light. Lights will turn on when room is
vacant to the specified dim level.
LIGHT SENSOR
– Set desired
light level of room including all light
sources*.
*Note: while increments shown on Interface
are 10%, adjustments can be made in 1%
increments
The Scenes feature provides the ability to create and easily switch between 16 custom lighting configurations within a room.
A Scene configuration is easily created by setting the lights to the desired settings and then saving the scene.
1. From the Lighting menu, select the room to which a
scene will be saved.
2. Select the dropdown arrow next to the scene number
in order to:
• Save Current Scene – Saves scene to current light
level in the room.
• Rename Scene – Customize name of scene.
• Open Advanced Scene Editor – Enables
configuration of scenes at the light fixture level for
additional customization of scene settings.
3. To rename the Scene, select the dropdown arrow
next to the scene number you want to rename and
click Rename Scene and type in desired name.
4. With the Advanced Scene Editor, you can adjust
settings at a Luminaire Controller level to set scenes.
Use the slider bar to set the desired light level of
a Luminaire Controller in the room. The “NOW”
indicator on each slider shows the current level for
each Luminaire Controller. Click TRIGGER SCENE
to preview the scene that is being configured in the
space. Then click SAVE.
5. To activate any scene, click on the name of the scene.
7.2 ADJUSTING ROOM SETTINGS
7.3 CONFIGURING SCENES