14
INSTALL
6.0 ADDING DEVICES INTO THE SYSTEM
The Audacy iOS includes a function to allow device serial numbers to be quickly populated into the Audacy Wireless
Controls system by scanning the bar code on the device.
Note: Prior to scanning serial numbers, a room must be created in order to associate devices to that specific room
(See
Section 5.0).
Devices must be added to the system and assigned to the appropriate room according to the lighting design plan.
A device can be physically installed either before or after being added to the system.
6.0 ADDING DEVICES INTO THE SYSTEM
1. Open the Audacy iOS app on
your Apple
®
device.
2. Click SETUP.
3. Select the target Gateway.
4. Select the target Room.
6.1 MOBILE INSTALLATION METHOD (RECOMMENDED)
6.1.1 SCANNING DEVICES VIA THE AUDACY
®
iOS APP
Summary of Contents for Audacy Wireless Controls
