42 / 74
00U07352250-A_ EN
AHP60
26/32 kW -
Installation, Use and Maintenance
CAUTION:
It is important to separate high voltage cables from very low voltage cables
3.6.4. Connecting the command unit
See Ecomod Heat Pump Control manual.
3.6.5. User terminal
The terminal block is under the machine cover. To access it, refer to the instructions in
paragraph 2.5.2. The terminal block must be connected in compliance with the remarks
below.
L1 - L2 - L3 - N - PE => General power supply
F1 : 3 x fuse 32A, 10.3 x 38
K1: phase controller
Figure 13 - Power terminal block 26 - 32-kW
Figure 14 - Command terminal block 26 - 32-kW
XF1 to 3 terminal block with integrated fuses of type: 6.3A 5x20F
XLF1 to 3 / XNF 1 to 3 terminal block with integrated fuses of type: 8A 5x20F
Ecomod heat pump controller Communication bus
Programmable alarm report
External safety
Programmable defrosting signal
Programmable input (e.g.: silence mode)
