24 / 74
00U07352250-A_ EN
AHP60
26/32 kW -
Installation, Use and Maintenance
Figure 4 - Lifting with a fork lift truck
3. INSTALLATION
3.1.
Lifting and handling
Handling must be carried out by qualified personnel, correctly equipped with tools suited to the
weight and size of the unit, in compliance with the accident prevention safety rules.
Notes:
1. Check the weight on the data label on the unit or in the technical data table;
2. Check by moving the unit that there are no paths, ramps, steps or disconnected doors that
could affect movement and damage the unit;
3. Make sure that the unit remains horizontal while it is being moved;
4. Before moving the unit, check that the devices are suitable for lifting and preserving the
integrity of the unit;
5. Check the unit's centre of gravity and align it with the lifting point.
6. Only lift using one of the listed procedures;
7. Before any handling is started, ensure that the unit is balanced and stable.
3.1.1. Lifting method
The following lifting methods are authorised:
- fork lift truck
- ropes/ sling bar
Lift progressively and check that the ropes/chains are in the correct position
CAUTION:
The outdoor unit and the Ecomod Heat Pump Control must be installed using
the new equipment supplied.
Figure 5 - Lifting with sling system
