OTHER COMPONENTS
80
Adjusting a quick-release clamp
1. Open the quick-release lever.
2. Turn the tensioning screw clockwise one quarter of a revolution.
3. Close the quick-release lever.
4. Then check whether the quick-release clamp is securing the component properly.
Repeat the process until the quick-release clamp is securing the component properly
when closed.
If you cannot secure the component properly, contact your specialist dealer.
39 Bell
Depending on the model, the pedelec is fitted with a bell on delivery. If the pedelec is not
fitted with a bell, you can retrofit one.
• In case of any questions, consult your specialist dealer.
To enable you to give clearly audible acoustic signals for the benefit of other road users while
cycling, the pedelec must be fitted with an appropriate bell prior to use on public roads.
• If the bell attached to the pedelec does not make a clearly audible sound, contact your
specialist dealer to have the bell replaced.
• Position the bell on the handlebar so that you can easily reach it without taking your
hand off the handlebar grip.
Summary of Contents for PRISMA-810
Page 1: ...BMIEEN22V01 Original Instructions EN 15194...
Page 99: ...99 NOTES...
Page 100: ...BMIEEN22V01...
