IDEAL Bikes PRISMA-810, Original Instructions Manual

Page: 43 / 100

43
SPECIAL CHARACTERISTICS OF THE E-DRIVE
3
4
5
3
Locking cylinder
4
Battery
5
Double locking plate
Fig. 7: Removing/inserting the fully integrated battery
Removing the fully integrated battery
1. Switch off the e-bike system and battery.
2. Insert the key into the locking cylinder
3
of the battery holder.
3. Support the battery
4
with one hand and turn the key clockwise to unlock the battery.
The double locking plate
5
holds the battery in the intended position to prevent it
from falling out. If the battery is not released from its position, pull it out by hand while
turning the key.
4. Hold the battery firmly in one hand and press the double locking plate
5
.
The battery is unlocked and can be removed from the holder in the direction of the
head tube.
Inserting the fully integrated battery
1. Insert the battery into the frame with the contacts on the lower battery holder.
2. Push the battery into the upper holder as far as it will go until you feel it click into place.
3. After insertion, check that the battery is firmly and securely engaged by carefully pulling
it.