23
SAFETY
WARNING
Risk of electric shock!
Improper handling of electrical power and live components may result in an
electric shock.
»
Check the charger, mains cable and mains plug for damage before each use. Do
not use the charger if you discover damage or suspect that it is damaged.
»
If the charger's power cable is damaged, it must be replaced by the manufacturer,
its Customer Service department or a similarly qualified person in order to avoid
hazards.
»
Do not kink the charger's power cable or place it over sharp edges.
»
Only connect the charger to a properly installed and easily accessible power
outlet with a mains voltage that matches the voltage indicated on the charger.
»
Only use the charger in dry, indoor rooms.
»
Make sure that the mains voltage at the mains connection corresponds to the
specification on the charger.
»
Do not allow the charger and the battery or the connection contacts for the
battery on the pedelec to come into contact with water or other liquids.
»
Keep the components of the e-drive (especially the connection contacts on the
battery and charger) in a clean condition.
»
Do not pull on the power cord or charger cable to remove the respective cable
from a socket or outlet, instead, always take hold of the respective plug.
»
Never touch the plugs of the power cable or charger cable with wet or damp
hands.
WARNING
Risk of explosion!
If a battery is not handled properly, it can explode.
»
Keep the battery away from fire and other heat sources.
Summary of Contents for PRISMA-810
Page 1: ...BMIEEN22V01 Original Instructions EN 15194...
Page 99: ...99 NOTES...
Page 100: ...BMIEEN22V01...