Ideal AKE AKV 116, Operating Manual

Page: 158 / 168

Subject to technical changes | Valid from July 2021
74
CLEANING/MAINTENANCE/SERVICING
REFRIGERATED DISPLAY CASES
04
Danger of colliding with units during installation, cleaning and maintenance work
Be aware of possible dangers of colliding with the unit.
WARNING
Danger of crushing and danger from falling objects when handling/aligning/positioning individual components
When handling objects, be aware of possible crushing dangers, including for third persons. If possible, use both hands
when handling objects. When handling/aligning/positioning heavy individual components, protective gloves and safety
shoes must be worn.
WARNING
4.1.11. CLEANING HINGED HOT GAS CONDENSATE EVAPORATION
Beware of hot surfaces when opening the condensate evaporation
Switch the unit off before any cleaning work. Touching the hot gas line when it is switched on can cause burns. Wait for
some time until the lines have cooled down.
CAUTION
Danger from electrical voltage on live components
The power supply must be disconnected before all cleaning and service work. To do this, unplug the cooling appliance or
disconnect all poles from the power mains.
DANGER
Only the cleaning agents mentioned in Chapter 4.1.2 are permissible for cleaning the unit. After cleaning, all parts must
be rinsed with clean water and then dried so that no residue remains.
NOTE
The cleaning instructions provided are to be used for both the hot gas condensate evaporation and the electric condensate tray
(optional accessory).