Ideal AKE AKV 116, Operating Manual

Page: 130 / 168

Subject to technical changes | Valid from July 2021
46
OPERATION AND USE
REFRIGERATED DISPLAY CASES
03
3.3. STOCKING THE UNIT AND ADJUSTING THE HEIGHT OF THE SHELF
Stock the unit with pre-cooled products via the sliding or hinged doors from the operator side, or via the customer side in the case of
open units and units with a closed back wall. The products can be placed on glass shelves and on the base deck.
In units with convection cooling, the presented products are cooled by a directional air curtain of cooled air. The specified minimum
distance (see marked stacking limits) from the lighting and the air outlet openings must be maintained. The ventilation slits on the
front
1
and rear
2
side of the unit must not be covered under any circumstances.
Observe the maximum carrying capacity of the base decks and shelves
Loading shelves: see stacking limit / outline drawing of the corresponding model group.
Loading the base deck: see stacking limit / outline drawing of the corresponding model group.
Ensure that you do not store any kegs or bottles on the glass shelves.
ATTENTION : The stacking limit can vary depending on the overall height of the unit. Please contact the manufacturer
regarding this.
NOTE
Flawless functioning can only be guaranteed if the supply and return air openings are kept free and the cold air curtain
is not blocked.
Ceramic plates can cause scratches on powder-coated base decks.
NOTE
NOTE
Observe the respective stacking limits, as well as the loading and storage
areas of the shelves. The cold air curtain of the unit must not be impaired/
interrupted by stored products. This is the only way to achieve optimum
cooling of the products.
NOTE
Stocking
Correct stocking
= stacking limit
Symbolic representation
2
1