60
10.1.4 Change the Record & Timer Properties Via the Network
Follow the instructions below to reconfigure the record and schedule recording settings via the
network.
A.
B.
Set the regular record settings
1. When in the single device mode, click
to enter the SETUP page. (See the sample screen as
in A above).
2. Select a desired recording rate and Quality from the corresponding drop-down list
3. Click the
OK
tag to proceed.
Set the Alarm record settings
1. When in the single device mode, click
to enter the SETUP page (see the sample screen as in
A above).
2. Set the ALRM SETTING to ON to enable the drop-down list in the ALARM SETTING area.
3.
Select a desired recording rate and Quality from the corresponding drop-down list.
4. Click the
OK
tag to proceed.
Set the Record Schedule
1. When in the single device mode, click
to enter the SETUP page (see the sample screen
as in B above).
2. Set the
Record Schedule
to
ON
to enable the
Record Schedule
setting area.
3. Click the
Time-Period
button to set the schedule for recording for each day. Go to both the
START
TIME
&
END TIME
boxes, enter a specific
Hour: Minute
and click
Add
button to add to the
Record List
.
4. When all required settings are completed, click
OK
to proceed.
