50
5.
6.
5. Attach the interface connector and the
power connector to the drive. Please
note the red lining of the IDE cable
and the red wire of power cable must
line up side by side.
6. Place the HDD inside the mobile rack.
Use four of the provided screws.
7.
8.
7. Place the top cover back on the carrier
body by sliding it forward.
8. Slide the carrier body back in the
mobile rack.
9.
10.
9. Push the carrier body further into the
mobile rack until it is fully inserted.
10. Push the active-handle inward.
11.
11. Lock the Key.
