ID View IV-400CD-SN Installation & Operation Manual Download

Page: 55 / 83

10. Network Viewer and Image Viewer

This section provides instructions for installing and using the Network Viewer and Image Viewer which are

included with the

IV-400CD-SN

. The programs can be operated by a selected PC equipped with the following

requirements.

1. Intel Pentium 233MHz at least.

2. 32 MB RAM

3. Window 95, 98, NT, and ME.

4. 4 MB Video card capable of 24-bit true color display.

5. 5 MB free hard-disk space for software installation.

6. 10-base T network for LAN operation.

10.1 The Network Viewer

10.1.1 Introduction to Network Viewer

The Network Viewer allows you to potentially access an unit of the

IV-400CD-SN

from a remote desktop or a

laptop in a TCP/IP networking environment. It can perform the following functions.

View live images from the 4CH DVR

Store, search, and review recorded video from the 4CH DVR HDD.

Change the regular record, event record, and timer properties.

Before you are ready to view images from a desktop, you need to have your 4CH DVR networked by obtaining

a 10-base Ethernet data cable (Standard RJ-45) to connect the 4CH DVR to your LAN/WAN. Now enter the

main menu to set the IP address.

4CH DVR

RJ-45

Summary of Contents for IV-400CD-SN




















































































Search results

Summary of Contents for IV-400CD-SN

Reviews:

Related manuals for IV-400CD-SN

Brands by name

Popular brands

ID View IV-400CD-SN, Installation & Operation Manual

Search results

Summary of Contents for IV-400CD-SN

Reviews:

Related manuals for IV-400CD-SN

Brands by name

Popular brands