ViVOpay Vend 3 User Guide
2
Getting Started
Unpacking the ViVOpay Vend 3, iris VRX
The ViVOpay Vend 3,iris VRX requires a data cable and a power supply. Verify that you have all the
required components for the installation.
ViVOpay Vend 3, iris VRX (P/N 540-0717-XX*)
*XX designates variations of the base model.
Data and Power cables (varies by length)
• Serial Data Cable (P/N 220-2467-XX*)
• USB Data Cable (P/N 220-2466-XX*)
These cables are recommended and approved by
ID TECH to comply with FCC rules and regulations.
*XX designates cable length.
Power supply
• US/North America (P/N 140-2035-00)
• Europe (P/N 140-2035-01)
• United Kingdom (P/N 140-2035-02)
• Australia (P/N 140-2035-03)
This power supply is recommended and approved
by ID TECH to comply with FCC rules and
regulations.
You may also need the following:
• Four M3 screws
If you want to secure the reader to a surface, you need four M3 screws of the appropriate length
(not supplied).
• Contactless test card (
ViVOcard Contactless Test Card P/N 241-0015-03)
The ViVOtech data cables and power supply are specifically designed to meet FCC requirements. If
you are using other cables or power supply, you may be required to install ferrites. For your free
ferrite core kit with installation instructions, please contact ViVOtech support.
Accessories
The following accessories are available for the ViVOpay Vend 3.
Part Number
Description
520-XXXX-XX
PIN pad
