ViVOpay Vend 3 User Guide
6
Installing the ViVOpay Vend 3
2. Insert the card with the contacts facing the bottom of the SAM cage. The cut corner of the
SAM should be positioned shown below.
3. Press the cage into the closed position. The cage will snap into place.
4. Slide the lock bar up, towards the connectors, to lock the SAM in position.
Connect Data and Power
There are connectors for Ethernet, data and power, and PIN pad in back of the ViVOpay Vend 3, iris
VRX. The connections you need to make are dependant on your specific POS configuration and
application. The power is received on the data connector.
Data cables are available in 1, 2, and 3 meter lengths (part numbers ending in -00, -01, -02
respectively). The pinouts for the POS side of the data cables are given in the tables below.
RS-232 (220-2467-0X)
DB9 Pin Number
Description
1
No connect
2
RS-232 Tx
3
RS-232 Rx
4
No connect
5
GND
6
No connect
7
No connect
