-
None
-
RFC3323
-
RFC3325
⦁
Dial Without Deregistered
: Set call out by proxy without registration.
⦁
Click To Talk
: Enable the click to talk feature.
⦁
User Agent
: Set the user agent if required.
⦁
Response Single Codec
: Enable single codec response to an incoming call request.
⦁
Ring Type
: Select the ring tone type for the selected line.
⦁
Conference Type
: Set to
Local
to set up a conference call on the intercom (supports a maximum of two
remote parties) or set to
Server
to connect to a conference room on the server.
⦁
Server Conference Number
: The
Conference Room
number when Conference Type is set to Server.
⦁
Transfer Timeout
: The timeout setting (in seconds) for the call transfer process.
⦁
Enable Long Contact
: Allow additional characters in the contact field where required to include user agent
capabilities as per RFC3840.
⦁
Use Quote in Display Name
: Include quotes in the
Display Name
.
⦁
TLS Version
: Select the TLS version. Supported protocols are
TLS 1.0
,
TLS 1.1
or
TLS 1.2
.
⦁
Specific Server Type
: Specify a server type for the line to communicate with.
⦁
Registration Expiration
: The SIP expiration frequency.
⦁
Use VPN
: Set the line to use a restricted VPN.
⦁
Use STUN
: Set the line to use STUN for NAT traversal.
⦁
Convert URI
: Convert non-alphanumeric characters to hex code.
⦁
DTMF Type
: Set the DTMF type to be used for the line.
-
In-band
-
RFC2833
-
SIP_INFO
-
AUTO
⦁
DTMF SIP INFO Mode
: Set the mode as required.
-
Send 10/11
-
Send */#
⦁
Transportation Protocol
: Set the line to use
UDP
,
TCP
or
TLS
for SIP transmission.
⦁
Local Port
: Set the local port.
⦁
SIP Version
: Select the SIP version,
RFC2543
or
RFC3261
.
-
FROM
-
PAI-FROM
-
RPID-FROM
-
PAI-RPID-FROM
-
RPID-PAI-FROM
⦁
Caller ID Header
: Select as required.
⦁
Enable Strict Proxy
: Enables the use of strict routing. When the intercom receives packets from the server it
will use the source IP address, not the address in the via field.
⦁
Enable user=phone
: Sets user=phone in SIP messages.
⦁
Enable DNS SRV
: Set the line to use DNS SRV which will resolve the FQDN in proxy server into a service list.
⦁
Keep Alive Type
: Set the line to use a dummy
UDP
or
SIP Option
packet to keep the NAT pinhole open.
⦁
Keep Alive Interval
: Set the transmitting interval.
⦁
Sync Clock Time
: Synchronize the device time with the server.
PRT-IPIC-POE | Protege Vandal Resistant VoIP Intercom | Installation Manual
23
