Connect and Test
1.
Connect to the intercom board connectors:
-
RJ45
-
Power
-
Electric-Lock
2.
Refer to the
Connections
page (see page 9).
3.
To test, press the # key on the
circuit board
for 3 seconds to obtain the IP address of the intercom unit.
Do Not proceed until the electric checks are confirmed.
Completion
Attach the
front panel
carefully into the
back panel
and replace the 4 screws, ensuring the screws have been
tightened correctly and the panels are secure to ensure waterproofing.
PRT-IPIC-POE | Protege Vandal Resistant VoIP Intercom | Installation Manual
11
