28
Innovative Circuit Technology Ltd.
TEXT MESSAGE ALARM NOTIFICATIONS
The panel can send alarm notifications as text messages to a cell phone by
configuring the alarm e-mails to be sent to your mobile phone service provider.
On the
E-mail Setup
page of the web based utility enter the address of your
phone in the
Recipient E-mail Address
field.
Example with an AT&T phone: enter the recipient address
cellnumber
@txt.att.net
, replacing
cellnumber
with your 10 digit cell phone
number.
Cell address formats for some common North American mobile phone providers:
AT&T
cellnumber
@txt.att.net
Verizon
cellnumber
@vtext.com
Sprint
cellnumber
@messaging.sprintpcs.com
T-Mobile
cellnumber
@tmomail.net
Virgin Mobile
cellnumber
@vmobl.com
Nextel
cellnumber
@messaging.nextel.com
Bell Mobility
cellnumber
@txt.bell.ca
Rogers
cellnumber
@pcs.rogers.com
Telus
cellnumber
@msg.telus.com
Virgin Mobile (Can)
cellnumber
@vmobile.ca
TROUBLESHOOTING
I am unable to access the web-based configuration utility:
Check that you are using the correct IP address for the panel by
downloading and running the
ICT IP Address Discovery tool
http://www.ictcorporate.com/resources/tools/
Check the network cable connections to the panel and the network
Ensure the network card settings on your computer are configured for
accessing the IP address of the panel. To access a panel with the default
IP address of 192.168.0.180 the typical network settings for your
computer are:
o
IP Address: 192.168.0.180
o
Subnet Mask: 255.255.255.0
o
Gateway: 192.168.0.1
