4. Assembly
6
4. Assembly
Please read the
Safety advices
on
page 5
before installation and keep this user manual for future reference.
Seali
ng
48,
0
3,0
Ins
tall
atio
n d
ept
h in
cl.
con
nec
tion
ter
min
al
139
,0
I
PM5/
I
PW5
Gap for physical unit
1.
After removing the fixing elements, insert the device.
2.
Check the seal to make sure it fits securely.
3.
Click the fixing elements back into place and tighten the clamping screws by hand. Then
use a screwdriver to tighten them another half a turn.
CAUTION! The torque should not exceed 0.1 Nm!
The dimension symbols can be exchanged before installation via a channel on the side!
