In the display, the program numbers (PN) are shown, right-justified, as a 3-digit number with a
P
in front of them.
Display of e.g. program number 0
Change between program numbers
To change between individual program numbers, keep the
[P]-key
pressed and push the
[
▲
]-key
for changing to a higher program number or the
[
▼
]-key
for changing to a lower
number. By keeping the keys pushed, e.g.
[P] & [
▲
]
, the display will begin, after approx.
1 second, to automatically run through the program numbers.
Change to parameter
Once the program number appears in the display, you can push the
[
▼
] or [
▲
]-key
to get to the
parameters set for this program number. The currently stored parameters are displayed.
In this case, it is 75,640
7.1
Programming
procedure
The
entire
programming
of
the
IPM5
/
IPW5
is
done
by
the
steps
described
below.
Change
to
programming
mode
Push
the
[P]
key
to
change
into
programming
mode.
The
unit
goes
to
the
lowest
available
program
number.
If
the
programming
lock
is
activated,
the
key
must
be
pushed
for
at
least
1
second.
19
7. Programming
Description of the program numbers
Example:
Change to programming mode by pushing key
[P]
.
The first released program number (PN) appears, in
this case PN0 .
Example:
A “3” is parameterised under PN1. Keep the
[P]-key
pushed and push the
[
▲
]-key
several times. PN1
appears in the display. Under this parameter the full
scale of the input 2 can be changed.
Example:
By pushing the
[
▼
] or [
▲
]-key
, the currently stored
value for PN1 appears in the display. In this case, it is
75,640.
